Publicité
Les langues disponibles
Les langues disponibles
13
6x
WARNING
Fatal injury by electric shock!
Contact with electrical wiring can lead
to electrical shock.
> Make sure that there are no
electrical wires or heating running
under wall or floor which could be
affected by the installation.
> Affix 6 flange clips to the wall frame
for side support of the bathtub.
16
> Fill the bathtub with water.
> Inspect for potential leaks.
14
> Connect waste and overflow to the
drain system.
17
> Finish wall and tiles.
> Make sure to install water-resistant
wallboard.
15
> Clean the bathtub.
18
NOTICE
Silicone with acetic acid can damage
the bathtub.
> Use alkoxy based silicone.
> Fill the bathtub with water.
> Apply silicone as needed.
> Let it sit for 24 h before draining.
57221_MAL_Bathtub_Tile flange_US/18.11.1
9
Publicité
