Publicité
5.Operation:
Handling of keys in following sequence. Guidance of operator by flashing symbole.
Connect the rated voltage on terminals a and b. Briefly appear all symbols on the display.
(No display? Press keys as per instructions on reset 5.92). Then is flashing 1999 (year).
During programming and after each step, a reset is possible (see 5.92)
5.1 Setting year (PrY)
Short pressing of both keys simultaneaously,
choose actual year
OK
Confirm.
5.11 Monat einstellen (PrM)
Short pressing of both keys simultaneaously, choose actual
choose actual month
OK
Confirm.
5.12 Setting day (Prd)
Day
Choose actual day.
OK
Confirm.
5.13 Choose summertime/wintertime changeover (PcH)
Ch 2 for continental Europe is preselected. If you can confirm,
press ok and continue with 5.2. If you cannot confirm,
continue as follows:
Summer adjustment
Winter adjustment
CH 0
None
None
CH 1
Last Sunday of March
Last Sunday of
CH 2
Last Sunday of March
Last Sunday of
CH 3
Last Sunday of March
Fourth Sunday of October
CH 4
First Sunday of April
Last Sunday of October
CH 5
Free setting
Free setting
Press both keys simultaneously, choose time
changeover as above
Confirm.
OK
5.14 Free choose of summertime/wintertime changeover CH 5
Press both keys simultaneously multiple times to choose
the month for summertime changeover.
OK
Confirm.
Day
Press key multiple times to choose the day for summertime changeover.
OK
Confirm.
Press both keys simultaneously multiple times to choose the month for
wintertime changeover
OK
Confirm.
Day
Press key multiple times to choose the day for wintertime changeover.
OK
Confirm.
5.2 Setting the clock time
Press alternatively short / long time until the actual time,
appears (short = minutes; long = hours).
Confirm.
P1 appears and the channel selection is flashing.
OK
Programme 1 is ready to be programmed.
5.3 Programming the switch-on and off time
Press one or multiple until times the weekday or group of days appears,
Day
(setting range: 1-7 = Mo-Su, every day separately, 1-4 = Mo-Th, 1-5 = Mo-Fr,
1-6 = Mo-Sa, 6+7 = Sa+Su).
OK
Confirm
Press alternatively short /long time until the required
switching-on time appears.
(short = minutes; long = hours)
OK
Confirm.
Press alternatively short /long time until the required
switching-off time appears
(short = minutes; long = hours).
OK
Confirm. Programme 1 is stored.
P2 appears flashing. Programme 2 is ready to be programmed.
For programme 2-20 repeat the steps under section 5.3.
If the programming is interruptedor completed, then automatically
after 3 minutes the actual time will appear on the display.
Indication of time is also possible by repeated aperation of the Prog key. After the time is
indicated the switching position of the relay and the weekday is shown on the display, too.
Changing of the switching position after programming can be done by the manual keys.
Programming is finished, different options see 5.4 - 5.91.
5.4 Programming the switch-off time for pulse
This switching function can be made in each programme after programming of the
switch-on time.
Prog
Choose the programme.
OK
Confirm.
Day
Press one or multiple times until the weekday or group of days appears.
Confirm.
OK
Press alternatively short/long time until the required switching-on time appears.
C
onfirm. (2x)
OK
Sec indicator, , and OFF is flashing, the switching pulse
OK
duration ca be programmed.
Press until the required switching pulse duration
(max. 99 sec.) appears.
Confirm. The programme with one pulse duration is stored.
OK
Flashing appears the next programme and is ready to be programmed.
5.5 Programming later
Press, when the actual time mode is on, to enter into the desired programme,
Prog
then continue as described under section 5.3.
OK
Confirm.
sec
sec
sec
sec
Region
September
Europe
October
Germany, Europe
Great Britain
Nord America
sec
sec
1 2 3 4 5 6 7
sec
.
1 2 3 4 5 6 7
sec
1 2 3 4 5 6 7
sec
1 2 3 4 5 6 7
5.6 Programming for several days
It is possible to programme the time switch for several days in one programme,
e.g. switch-on time: Monday 06:00 a.m.; switch-off time: Thursday 05:00 p.m.
Choose the programme.
Prog
Confirm.
OK
Day
Press one time and the desired weekday 1 = Mo, appears on the display.
Confirm.
OK
Press alternatively short / long time until the required switching-on time
(6:00 a.m.) appears (short = minutes; long = hours).
OK
Confirm.
Day
Press four times until the weekday 4 = Th, appears on the display.
OK
Confirm.
Press alternatively short / long time until the required switching-off time
(05:00 p.m.) appears (short = minutes; long = hours).
OK
Confirm. The programme is stored.
Programme number, switching day(s), ON and OFF-times.
5.7 Programme control
Press multiple times: Following schedule appears in succession:
Prog
Programme number, switching day(s), ON and OFF-times.
5.71 Programme changes
Prog
Press key multiple times until requested programme appears.
Enter new switch-on time.
OK
Confirm.
Prog
Press
Enter new switch-off time
Confirm.
OK
5.72 Deletion of individual programme
Prog
Press key multiple times until requested programme appears.
Press and hold on.
OK
Press additionally the OK key, 4 dashes appear and the indes of programme
Prog
is flashing, the programme is deleted.
5.8 Manual switching
Press and release immediately.
The relay status is changed manually
5.81 Continuous operation mode
Press for two seconds. Instead of clock time the display shows. Pier.
Press and release immediately. Thereby the required switching status is reached:_
continuous-ON or continuous-OFF.
5.82 Cancellation of continuous operation mode
Press for two seconds. Instead of Pier, the actual time appears on the display.
Press and release immediately. Thereby the required switching status ON or OFF
in automatic mode will be reached again.
5.9 Change clock time
Press short/long until requested time appears.
OK
Confirm.
5.91 Change date
Press both keys simultaneously until 1999 appears flashing.
Continue as described under 5.1 - 5.13.
5.92 Reset (switching programmes keep stored)
Press both keys simultaneously for approx. 3 seconds. 1999 appears flashing.
5.93 General reset (switching programmes go lost)
A reset only can be made, when the clock time is shown on the display, (the colon
OK
is flashing, clock time, day and switching position of the relay is shown on the
Reset
display).
Press both keys simultaneously for approx. 3 seconds. 1999 appears flashing.
Prog
Attention: If you dont press the OK and the Prog key simultaneously it appears P1
on the display. Then press the Prog key multiple times until the clock time appears
on the display, then try to reset again.
6. Control units:
Indicator for the switching
pulse time
Number of programmes 1-20
Actual time, switching time
Actual day, switching day
1 2 3 4
Adjusting clock time/switching time
Short pressing = minute steps
Long pressing = hour steps
Y-M-Ch
Keys for summertime/
Wintertime programme
Short pressing: relay manually ON/OFF
Long pressing: relay permanently
ON/OFF or back to automatic mode
Short pressing: relay manually ON/OFF
Long pressing: relay permanently
ON/OFF or back to automatic mode
Indication on manuel intermediate switching
SEC
Indicator for status of
l
1
the relay
O
l
2
O
User guide to programme
ON
the switching-on and off time
OFF
Reset (switching
5
6 7
programmes keep stored)
Day
OK
Confirmation key
Press simultaneously
Reset
for total deletion
Programme selection, Press shortly,
Prog
rapid programme is running
Short/long pressing: Actual day, day for
summertime/wintertime changeover
Switching days: single or groups
Publicité
