Control Panel: Mod. Kube 2 - resto italia TECNO A KUBE 1 Mode D'emploi

• open the oven door of the baking chamber grasping the opening handle;
• remove any food product from inside the baking chamber;
• stop the electric equipment as specified above;
• switch off the switch of the internal lamp (5);
• disconnect the feeding plug.

5.4. CONTROL PANEL: MOD. KUBE 2

The control panel is situated under the oven doors, from which the responsible
operator can manually carry out the starting of the machine (Fig. 5.3.):
1. Indicator light of the functioning lower resistance;
2. Thermostat of the lower resistance with position | - OFF;
3. Indicator light of the functioning central resistance;
4. Thermostat of the intermediate resistance with position | - OFF;
5. Indicator light of the functioning roof resistance;
6. Thermostat of the roof resistance with position | - OFF;
7. Switch of the lamp of the lower chamber
8. Switch of the lamp of the upper chamber
1 2
Fig. 5.3 - Control panel KUBE 2
In the KUBE oven, the baking chambers have the central resistance in common, so if you need to use just a chamber,
proceed with the ignition of the lower chamber.
5.5. USO DE LA MÁQUINA: KUBE 2
Activate the switch of the lamp (7 , 8 ) to turn on the internal lamp of the chamber:
• rotate the ignition knobs of the resistances (2, 4 and 6) according to the temperature you want to obtain;
• once the adjusted temperature has been reached, the indicator lights (1, 3 and 5) turn off, to indicate that the adjusted tempe-
rature of the relative chamber has been reached; it should be noted that the system, once the desired operation temperature
has been adjusted, is automatic.
• to stop the machine, rotate the knobs (2, 4, and 6) in position 0 - ZERO, with a following switching off of the indicator lights (2, 4,
and 6). In case of temporary or prolonged stop, before restarting the electric equipment, remove all the food products inside the
electric equipment. In case of prolonged stop, size the general installation of the power supply network, disconnect the feeding plug.
• before the switching off, wait for the baking process ending inside the electric equipment, then:
• open the oven doors of the baking chamber grasping the opening handles;
• remove any food product from inside of the baking chambers;
• stop the electric equipment as specified above;
• adjust the switches of the lamps (7 and 8) on the position O - OFF;
• disconnect the feeding plug.
ELECTRIC OVEN
3
4
5
KUBE 1
KUBE2
KUBE 2 PLUS
6
7
8
5 39
0.0