OK. OTF 151-W Mode D'emploi page 25

Size - A5
ASSEMBLY OF FRONT GUARD (OTF 231-W/OTF 301-W)
6
Open the clips, hook the
front guard onto the rear
guard, aligning both screw
holes.
ASSEMBLY OF BASE (OTF 231-W/OTF 301-W)
1
Push the motor unit into
the base and ensure that
it is firmly pressed into
the base and correctly
engaged.
OTF151-W_OTF231-W_OTF301-W_A5_121129.indb 25
25
7
Install the screw and nut to
lock the guards.
2
Fan correctly mounted on
the base.
8
Close the clips.
3
Fasten the base with
the screws from below.
(OTF 301-W)
Note
The screws are located in
the inner side of the base.
3/12/12 5:59 PM