Technical Data; What To Do If - Centronic SunWindControl SWC241 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
Nominal voltage
Type of battery
Protection class
Permissible surrounding temperature
Radio frequency
Problem
Drive is ot functioning,
transmission control
light is not lit.
Drive is not function-
ing, transmission
control light is lit.
Transmission control
light is flashing.
18

Technical data

What to do if ...?

Cause
1. Batteries are dead.
2. Batteries are incor-
rectly inserted.
1. Receiver outside the
radio range.
2. Transmitter is not
programmed in the
receiver.
Battery power is low.
3 V DC
LR 03 (AAA)
IP 20
-10 to +55 °C
868.3 MHz
Remedy
1. Insert new batteries.
2. Insert batteries cor-
rectly.
1. Reduce distance to
the receiver.
2. Programme transmit-
ter.
Replace batteries.