Use Of The Visio Touch Programmer - ELLECI PLANO PLUS Notice D'utilisation

operating. This function is used for faster
grilling and for grilling food with a larger
surface area, such as meat. Use the upper
shelves of the oven. Lightly brush the wire
grid with oil to stop food sticking and place
food in the centre of the grid. Always place
a tray beneath the food to catch any drips
of oil or fat. It is recommended that you
preheat the oven for about 10 minutes.
Warning: When grilling, the oven door
must be closed and the oven
temperature should be adjusted to
190°C.
Faster Grilling
Function: The oven's
thermostat and
warning lights will
switch on. The grill and
upper heating
elements will start
Double Grill and Fan
Function: The oven's
thermostat and
warning lights will
switch on, and the grill,
upper heating
elements and fan will start operating. This
function is used for faster grilling of thicker
food and for grilling food with a larger
surface area. Both the upper heating
elements and grill will be energised along
with the fan to ensure even cooking. Use
the upper shelves of the oven. Lightly brush
the wire grid with oil to stop food sticking
and place food in the centre of the grid.
Always place a tray beneath the food to
catch any drips of oil or fat. It is
recommended that you preheat the oven for
about 10 minutes.
Warning: When grilling, the oven door
must be closed and the oven
temperature should be adjusted to
190°C.
Steam Clean Function: Set the
oven function and thermostat to the
Steam Clean function symbol. Pour
200-250ml of water (about 1 cup)
into the small tray on the oven base.
Steam Clean runs for approximately 20
minutes and will prepare your oven so that
it can be easily cleaned.

4.2 Use of the Visio Touch Programmer

EN - 15