Unpacking The Appliance; Overview Of The Components / Scope Of Delivery; Notes On Use; Location - Profi Cook PC-FR 1147 H Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
• Keep the appliance and its cord out of reach of children less than
8 years.
• Do not try to repair the appliance on your own. Always contact an
authorized technician. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly quali-
fied persons in order to avoid a hazard.
CAUTION:
This appliance is not intended to be immersed in water during
cleaning. Please observe the instructions that we have included for
you in the chapter "Cleaning".

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging materials like foils, filling materi-
als, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.
4. If there are missing parts or obvious damage, do not use
the appliance. Return it to your retailer immediately.
Overview of the Components /
Scope of Delivery
1 Air inlet opening
2 Air outlet opening
3 Fat tank with internal basket
4 Handle of the basket
5 Cover for the underlying release button
6 Display

Notes on Use

Location

• Set the appliance onto a non-slip, level, and heat-resist-
ant surface.
• Take care that the appliance and the mains cable never
are placed onto hot surfaces or near heat sources (e. g.
range, hob).

Electric Connection

Before inserting the power plug into the outlet, check that
the mains voltage to be used matches that of the appliance.
You can find the required information on the nameplate.

Connected Wattage

The total power consumption of this appliance can be up
to 1500 W.
PC-FR1147H_IM
CAUTION: Overload!
Do not use any multiple sockets, as this appliance is too
powerful.

Standby (Standby Mode)

NOTE:
The appliance is in standby, if the
When faced with the following situations, the appliance will
switch into standby:
• When the power plug is inserted.
• When the time has elapsed.
• When you press and hold the
3 seconds.

Switching the Appliance On / Off

Turn the appliance on and off by using the
NOTE:
• Operation is only possible if the fat tank is used with
the basket in the appliance.
• Once the time is up, a bell will sound. The appliance
will switch off automatically. The fan keeps running to
cool down the appliance. After approx. 20 seconds,
you will hear 5 beep sounds and the
off.

Before Initial Use

• There is a protective layer on the heating element. To
remove this, operate the appliance for about 10 minutes
without any contents.
NOTE:
Any smoke or smells produced during this procedure
are normal. Please ensure sufficient ventilation.
button lights red.
button for approx.
button.
symbol goes
41
28.11.17

Publicité

Table des Matières
loading

Table des Matières