Ryobi CFP-180SM Manuel D'utilisation page 7

CFP-180SM 2/06/05
GB
F D E
RULES FOR SAFE OPERATION
WARNING
When using battery operated tools, basic safety
precautions should always be followed to reduce
the risk of fire, leaking batteries and personal
injury, including the following: Read all these
instructions before operating this product and
save these instructions.
Know your flashlight. Read user's manual carefully.
■
Learn its applications and limitations as well as the
specific potential hazards related to this flashlight.
Use only with recommended battery pack
■
and charger. Any attempt to use another battery
pack will cause damage to your light and could
possibly explode, cause a fire, or personal injury.
Remove battery pack from flashlight before
■
replacing bulb or performing any routine
maintenance or cleaning.
Do not disassemble your flashlight.
■
Do not place flashlight or battery pack near fire
■
or heat. This will reduce the risk of explosion and
possibly injury.
Do not dispose of a worn out battery pack by
■
incinerating. Do not incinerate the battery,
even if it is severely damaged or completely worn out.
The batterymay explode in fire
Do not store your flashlight in a damp or
■
wet location. Also, do not store in location
where the temperature may reach or exceed 40°C
(104°F). For example, outside sheds, vehicles,
or metal buildings in the summer.
Do not permit children to use flashlight
■
unsupervised. It is not a toy. The temperature of the
bulb can become hot after being on for an extended
period of time. This hot temperature may cause burn
injury if touched.
Keep work area clean. Cluttered areas and benches
■
invite accidents.
Avoid dangerous environment.
■
Keep light dry, clean, and free from oil and
■
grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based
products or any strong solvent to clean your light.
Stay alert. Watch what you are doing and use
■
common sense. Do not rush.
16:58 Page 4
I P NL S DK N
English
4
FIN GR H CZ RUS
Check damaged parts. Before further use of this
■
light, a part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Do not use flashlight if it
does not function properly.
Have your light repaired by a qualified person.
■
This tool is in accordance with the relevant safety
requirements. Repairs should only be carried out by
qualified person using original spare parts, otherwise
this may result in considerable danger to the user.
WARNING
Do not operate flashlight or charger near
flammable liquids or in gaseous or explosive
atmosphere. Internal sparks may ignite fumes.
WARNING
Lens and bulb become hot during use.
During or immediately after use, don't lay
flashlight flat on lens surface.
Handle flashlight with care around any
flammable surface.
If bulb has been lit, let flashlight cool for several
minutes before changing bulb.
Do not use or permit use of flashlight in bed or
sleeping bags. A burn injury could result.
Battery tools do not have to be plugged into an
■
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
If under abusive conditions, liquid is ejected from
■
the battery, avoid contact. If this accidentally
occurs, flush with water. If liquid contacts eyes
additionally, seek medical help. This will reduce the
risk of explosion and possibly injury.
WARNING
Batteries vent hydrogen gas and can explode in
the presence of a source of ignition, such as a
pilot light. To reduce the risk of serious personal
injury, never use any cordless product in the
presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush
with water immediately.
RO PL SLO HR TR