DNT DigiScan TV 9.0 Mode D'emploi page 53

To connect to the TV set
The DigiScan TV comes with a video cable in the delivery content. The cable has a 3,5mm phone jack and
a RCA jack. If your TV set has not RCA video input, it is necessary to use an RCA- Euro scart adaptor. This
adaptor is not in the delivery content.
The preview mode has a smaller resolution on the TV set.
Technical specifications
Imgae sensor
Lense
Display
Internal memory
External memory
Focus range
Exposure Control
Color Balance
Scan Quality
Data Conversion
Scan Method
Light Source
Interface
USB Configuration
Power
Dimensions
Weight
9MegaPixel CMOS
F2.0
2,4" TFT
24MB Flash
SD/MMC compatible
fixed
Automatic
Automatic
2400dpi
10 bits per color channel
Single pass
Back light (3 white LEDs)
USB 2.0
TV-out (video 3.5mm jack)
Mass Storage Device Class/MSDC
5V adapter or USB power
82x86x152mm
413 g
- 53 -
Operation