Frigelux TT90VCM Notice D'utilisation page 23

Clicks
These can always be heard when the electronic card turns the motor on or off.
INCONVENIENCES OR MINOR BREAKDOWNS
Certain problems may appear when you are using your appliance. Before calling the after-sales service, use
the guide below to see if you can resolve the problem yourself:
PROBLEM AND ADVICE
Unusual noises
- Check the adjustment of the feet of your appliance and its stability.
- Check that it is not touching a wall.
- Check that all the movable parts (trays, racks, etc..) are securely in place.
The fridge and freezer does not get cold enough
- Check that the temperature is correctly set as indicated in the section on "Adjusting the temperature".
- If you have put a large amount of foor in your fridge or freezer at one time, ensure that you readjust the
temperature as shown in the section on "Adjusting the temperature".
- Be careful not to open your appliance's door too often, and not to leave it open.
Your appliance does not get cold at all
- Check that your appliance is connected to the electrical supply.
-Check that the circuit-breaker for your house has not cut out and that the fuse has not blown or been
unscrewed
Frost forms inside your appliance
- Be careful not to open your appliance's door too often and not to leave it open.
Frozen meat has white streaks
- Check that your temperature is correctly set and is not at too low temperature (see the section on "Setting
your freezer's temperature").
- Check that you haven't kept this meat too long in the freezer using the table you will find in the "Food
Freezing Guide" section.
The door is difficult to open
- It is normal for the door to offer some resistance to being opened, particularly when you have just shut it: a
slight under pressure forms in your appliance to ensure the door seals perfectly. AIl you have to do is wait a
few seconds before re-opening.
Note: During the period of high humidity, moisture may form on the outside of the freezer, this is not
unusual. You may just wipe it up yourself.
9° TECHNICAL ASSISTANCE DEPARTMENT
If you have already performed the indicated checks and your problem still persists, DO NOT ATTEMPT TO
MAKE ANY REPAIRS YOURSELF. Contact your nearest Technical Assistance Department.
Any work on your appliance must be performed by an accredited qualified professional.
When you call, please mention the complete reference for your machine (model, type, serial number): this
information is provided on your guarantee certificate and the information plate on your appliance.
ORIGINAL SPARE PARTS: when any maintenance work is being performed, ask that only certified original
spare parts be used.