Waeco PerfectBattery BC100 Manuel D'utilisation page 18

MBCC-100_200.book Seite 18 Dienstag, 12. September 2006 4:18 16
Technical description
When the lowest charging voltage has been reached, the charging process
is started automatically.
This sequence is repeated cyclically. The constant change between charging
and discharging reduces the effect of ageing on the battery.
5.1 Display elements
Item
in fig. 1,
page 3
3
4
5
3 + 4
18
LED Meaning
Yellow "Charging": battery is being charged.
Green "Discharging": battery is discharging.
Red "Incorrect polarity": the battery has been
connected with the incorrect polarity.
➤ Please disconnect the battery from
the battery conditioner.
Green and The connection has been broken.
yellow
➤ Check the connection to the battery.
➤ If possible, try to make a direct
connection to the battery using the
adapter cable.
The fuse in the plug is defective.
Reversing the polarity of the connection
terminals will cause the fuse to blow in
the 12/6 V plug.
➤ Replace the fuse.
PerfectBattery