Accessories - POLTI Sani System Business Manuel D'instructions

SANI SYSTEM BUSINESS - M0S12056 - W1DS - 2U06_FEV 1000-950.qxd 10/06/2020 12:11 Pagina 27
WARNING: Do not screw the bottle to the
gun without the stopper. If no consumption
of Polti HPMed is seen during use of the pro-
duct, this means that the stopper has not
been inserted correctly, or has folded within
the bottle. Unscrew the bottle and repeat
the insertion procedure, taking care to posi-
tion it correctly.
WARNING: If steam is escaping from the sa-
fety cap, switch the appliance off and unplug
it from the mains. Wait for two hours for the
appliance to cool before unscrewing the cap
and screwing it back on.
2. STEAM ADJUSTMENT
WARNING: A larger or smaller adjustment will
be necessary only when using Polti Sani Sy-
stem Business in combination with the optio-
nal accessories (Steam cleaning kit and Fluid
Curve accessory iron).
3. USE
WARNING: Dispense "non-usable" steam for
about 30 seconds downwards to reach the
optimum operating temperature and pres-
sure. At the first use after switching on the
appliance, some drops of water may be
mixed with the steam due to imperfect ther-
mal stabilization
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in co-
lour or deformations have occurred.

4. ACCESSORIES

Straight flow concentrator
| 27 |