Victron energy PPP-8 Manuel page 12

8 Peak Power Pack FAQ List
Subdivided into:
I. Charging
II. Maintenance
III. Use
IV. Technology
V. Installation/Connection
VI. Interesting facts
We obviously recommend the "future" Victron Energy Peak
Power Pack user to carefully read the manual so as to make
optimal use of the Victron Energy PPP. The following FAQ list is
to be used as a supplement to the manual.
Question
1 How much does
a PPP demand
from the car's
battery?
2 How can the
PPP be
charged?
10
I. CHARGING
Max. 7A, depending on the car's
battery voltage.
a. With the included 110...230V
charger (15V, 3A). Duration
approx. 4 hours for the 8Ah
version.
b. With a solar panel connected
to the car/solar input. The PPP
will control the charge voltage
and limit the input current to max.
7A.
The solar panel, therefore, may
be overrated.
c. From the car or any other 12V
power source. The PPP will
control the charge voltage and
current. The charge duration from
empty to fully charged is approx.
3 hours for the 8Ah model.
d. The PPP can also be fast-
charged by connecting a 12V/60A
(max) charger to the high current
Answer