Aqua Medic Titan 200 Mode D'emploi page 7

Clean the filter sieves and air-cooled condenser regularly. Beforehand, unplug the unit. The filter sieves to
protect the condenser from dust are located on the side and front of the housing. To clean the front filter, the
screw at the bottom of the housing has to be loosened. The side filters are clicked in.
If the condenser is still soiled, the housing is opened with a screwdriver and the lamellas of the condenser are
carefully freed from adhering dust, for example with compressed air.
Without this regular cleaning, fan and compressor may be irreversibly damaged. We recommend to flush the heat
exchanger thoroughly once a year to remove any muddy parts.
6. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear. The original invoice
or receipt is required as proof of purchase. During the warranty period, we will repair the product for free by
installing new or renewed parts. This warranty only covers material and processing faults that occur when used
as intended. It does not apply to damage caused by transport, improper handling, incorrect installation,
negligence, interference or repairs made by unauthorized persons. In case of a fault with the unit during or
after the warranty period, please contact your dealer. All further steps are clarified between the
dealer and AB Aqua Medic. All complaints and returns that are not sent to us via specialist dealers
cannot be processed. AB Aqua Medic is not liable for consequential damages resulting from the use of any of
our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 09/2021/v7
7