This unit is intended for free-standing installation only. It must never be built-under or built-in.
For proper operation of the appliance, it is imperative to allow good air circulation around the unit.
We do not accept any liability instance of non-compliance with the installation instructions.
Not designed for placement in adage or basement.
The appliance is for indoor use only.
This appliance is intended to be used exclusively for the storage of wine.
This appliance is using flammability refrigerant. So never damage the cooling pipe work during the
transportation.
Connect the appliance to a single socket, leaving a 10 cm gap between the back of the cellar and
the wall. Be careful to support it, so that your wine cooler is perfectly level. (The use of a spirit level
is recommended). This will prevent any movement due to instability, generating noise and vibration,
and will ensure that the door seals perfectly.
Attention
Store wine in sealed bottles.
Do not overload the cabinet.
Do not open the door unless necessary.
Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation.
Should the wine cooler be left empty for long periods it is suggested that the appliance is
unplugged, and after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet
in order to avoid possible condensation, mold or odors forming.
CAUTION: please keep the appliance away from substance, which can cause ignition.
Ambient room temperature limits
This appliance is designed to operate in ambient temperatures specified by its temperature class
marked on the rating plate.
CLASS
Extended temperate
Temperate
Subtropical
Tropical
Reversing the door
Please be noted that the door is not reversible as control is put on the door.
SYMBOL
AMBIENT TEMPERATURES RANGE (°C)
SN
N
ST
T
From +10 to +32
From +16 to +32
From +16 to +38
From +16 to +43
38