Technical Description - Ferroli TERMO MODENA Manuel D'installation

1.4 Technical description

The stove works exclusively on pellets and enables easy installation with the heating system. The stove's automatic
control systems guarantee optimum heat output and complete combustion; there are also safety systems to
guarantee safe operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
The stove model TERMO MODENA with nominal power of 11.6 kW ensures a maximum heatable volume of 294
m³, considering the coefficient of a building's energy requirements equal to 35 W/m³, and may vary depending on
the insulation, type and climatic zone which are important variables for the correct choice of unit.
For technical data, refer to the table on page 8.
TERMO MODENA pellet heating stove dimensions
Key:
A - Power cable connection
B - Water drain in overpressure (1/2" female)
C - System return (3/4" male)
D - Water supply connection (3/4" male, max 2 bar)
E - Drain system (1/2" male)
F - Flue pipe connection Ø 80mm
G - Combustion air inlet Ø 50mm
H - System delivery (3/4" male)
I - Pellet hopper door
L - Adjustable feet
M - Control panel
32
TERMO MODENA