Sensor Settings - Majestic DUO 21/100 Notice D'utilisation

3.6.6. Sensor settings

Menu Sensor
Cover/Ext cmd
Parameters
Sensors
Flow/pH Can
Temperature
Sensor activated
Cover
External command
Flow
Empty container
Salt
Temperature
Setting
Mode
Type
Mode
Type
Salt
Ext cmd : external command.
pH Can : empty container sensor.
ON : sensor activated.
OFF : sensor disabled.
NO : switch normally open.
NC : switch normally closed.
Configuration
Open cover
Closed cover
Command activated
Command not activated
Sufficient flow
Zero flow
Empty container
Container not empty
Salt level less than 2.5 g/L
(or 1.5 g/L if Low Salt equipment)
Salt level equal to or greater than 2.5 g/L
(or 1.5 g/L if Low Salt equipment)
Water temperature below 15°C
Water temperature equal to or higher
than 15°C
* Modifiable value on the PRO model.
Possible settings
• Cover
• OFF
• Ext cmd
• NO
• NC
• Flow
• OFF
• pH Can
• NO
• NC
• ON
-
• OFF
pH Can empty
Low Temp Mode
Specific
Production
display
- Maintained
Divided by 5*
Cover
- Maintained
Stopped
Ext
- Maintained
Alarm
Stopped
Flow
Alarm
Maintained
- Maintained
Alarm
Stopped
Low Salt
- Maintained
Stopped
- Maintained
Default setting
Cover
NO
OFF
NO
ON
pH regulation
Maintained
Stopped
Maintained
8