Publicité
Power Output Stage
The DYNAMIC CORRECTION is incorporated actually within the output stage of the amplifier,
sensing the motion of the speaker and feeding this back to the power section for instantaneous
correction if required.
Every part of the TAB100 has been designed specifically for the accurate reproduction of an
acoustic bass signal. This includes the case, the speaker, the dynamic correction, etc. in a
development program assisted by both acoustic bass manufacturers and players.
TECHNICAL SPECIFICATIONS
Piezo/Lo Level Input
Impedance 4 Meg / Sensitivity 150mv to 8v RMS
Active/Hi Level Input
Impedance 47K / Sensitivity 300mv to 15v RMS
Graphic Equalisation
5 band +/- 15dB at centre frequencies of 100Hz, 230Hz, 500Hz, 1KHz & 2KHz
Notch Filter
Variable from 100Hz to 1.5KHz with a "Q" of 5
Effects Send
Impedance 47K Ohms / Signal level nominally 500mv
Effects Return
Impedance 10K Ohms / Signal level nominally 500mv
D.I. Output (balanced)
Impedance 600 Ohms / Signal level nominally 500mv
Output Power
100 watts RMS
7
Publicité
