Intended Use - GEHEIT ABAC SG 90 E Instructions De Montage

1 Intended Use

The ABAC Blower Unit SG 90 E (electronic) is intended to be used in
connection with a ABAC Low Pressure Spray Gun PN 2 or PN 5 to output
and apply paints. For spraying, you may use all materials approved by
paint manufacturers for spray gun application. These are for instance:
Patina paints, two-component-paints, synthetic resin alkyd paints,
l
acrylic and dispersion paints, colour effect paints, insulation/ inflamma-
tion protection, sprayable wax materials.
Always observe and comply with all processing instructions and safety
notes provided by material manufacturers.
In any case, only paints and solvents with a flash point above 21 °C may
be used for spraying.
19