Summit FF-874W Guide De L'utilisateur page 9

screw holes
central hinge
Reinstallation:
1. Remove the lower pivot pin from the lower hinge by turning counter
clockwise. Move the pin to the opposite hole and tighten. (see below)
fig. # 3
bottom of unit
bottom hinge
2. Tilt refrigerator on a 45-degree angle to have access to the
bottom front.
NOTE: Two People Required.
doorstopper (right side)
middle pivot pin
(see fig. # 3 and fig. # 4)
fig. # 2
lower pivot pin
English
8