Anker Soundsync A3352 Manuel De L'utilisateur page 4

EN
Charge the Bluetooth Receiver before first use.
If Soundsync freezes, press and hold the multi-function button, insert the Micro USB cable
to start charging, then restart Soundsync.
Using Your Soundsync
1. Turn on / off
03
ON Press and hold for more than 2 seconds
OFF
Press and hold for more than 2 seconds
Note: Soundsync switches on automatically during charging
2. Button controls
Bluetooth receiver mode
Steady blue (for 1 second) Power on
LED Off Power off
Flashing blue (Once a second) Bluetooth pairing mode
Connected to a device / Connected to two devices
Steady blue
simultaneously
Flashing blue (twice a second) Incoming call
Steady blue On call
EN
04