Publicité
Les langues disponibles
Les langues disponibles
GB
IMPORTANT - Read this information before
carrying out the installation work!
Key to symbols
Attention! Important note warning about the risk of
bodily injury or damage to property.
Attention! Important note warning about the risk of
electric shock.
Note, tip or reference
Warranty
– The function, safety and integrity of the product are only
guaranteed if the instructions given in this manual are
adhered to.
Non-observance of the safety instructions could lead to
bodily injury and damage to property.
The manufacturer is not liable for damage resulting from
non-observance of the instructions.
– To avoid installation errors and damage to the product, it
is essential that the installation instructions are followed
carefully.
– Besides the information given in this manual, please
follow the relevant general safety and accident prevention
regulations!
– This product left our factory in a condition complying with
all the requirements of technical safety.
– Bulbs are excluded from the scope of the warranty.
General safety instructions and information
– The installation of our product should only by
carried out by an approved domestic installer in
compliance with VDE 0100 Part 0701.
– Electrical cables must be connected in enclosed
wall light junction boxes in compliance with
DIN VDE 0100, Part 559/2009 - 06.
– Before commencing any cabling work, check that
the cables are at zero voltage. Measures must be
taken to ensure that the cables remain dead for
the duration of the work (e.g. prevent the power
supply from being switched back on).
– The underlying structure must be suitable for
bearing the weight involved.
– The user must determine the intended position of
the product before the installation work begins.
– Handle this product with the utmost care to avoid
damaging it.
Rings and other objects that may damage the
product must be removed before starting the
installation work.
– Before carrying out any drilling work, ensure that
no plumbing or wiring is routed behind the place
where you intend to drill.
– To clean this product, it is essential that you follow
the enclosed cleaning and operating instructions.
– All dimensions are given in millimetres (mm).
Drawings are not to scale.
– We reserve the right to make technical changes
without notice.
– Large, bulky or heavy items must be installed by
two people.
3 - 10
Publicité
