Publicité
Les langues disponibles
Les langues disponibles
1. HIGH TONE CONTROL
This control is used to adjust high frequencies of the main signal.
Note : Too much adjustments can deform the sound
2. LOW TONE CONTROL
This control is used to adjust low frequencies of the main signal
Note : Too much adjustments can deform the sound
3. MAIN VOLUME CONTROL
This control is used to adjust the main sound level of the speaker
4. LINE INPUT ( CINCH )
Connect on this input a line level device as CD player, DVD player, mixer, smartphone, tablet,.... Cinch connectors
5. LINE INPUT ( COMBO XLR / JACK )
Connect on this input a line level device as CD player, DVD player, mixer, smartphone, tablet,.... XLR and Jack connectors
6. LINE LINK OUTPUT
Connect this output to the line input of an other activ speaker or a power amplifier
7. POWER SWITCH
This switch is used to power on or power off the STUDIO 5A monitor speaker
8. AC SOCKET + FUSE
Before to connect the ac cord on this socket, make sure that the available voltage is not higher than stated at the end of this
manual
The ac fuse is integrated on the power connector. It's used to avoid power supply default on speaker. if the ac cord is connected
and power switch push on the position on but speaker doesn't work, please check the fuse. if the fuse is out of order, replace it
by fuse with same size and same value.
TECHNICAL SPECIFICATIONS
Amplifier type :
Bi amp amplification ( 40W + 15W )
Woofer :
5''
Frequency response :
48Hz – 20KHz
Sensitivity :
85dB
RMS power :
55W
Max power :
100W
Line input :
Combo XLR-Jack & CINCH
Line link output :
XLR
Power supply :
220-240VAC, 50/60Hz
Dimensions :
187x230x284mm
WARRANTY CONDITIONS
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BST are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BST will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
Publicité
