Reflecta RPL 306 Mode D'emploi page 3

Operating instructions for reflecta
Thank you for purchasing our reflecta RPL 306 StudioKit. Please read these instructions
carefully before using the RPL 306.
Specifications
Professional, adjustable LED studio light
306 super bright 10mm LEDs, adjustable brightness
Power adapter (input: 100~240 V AC, output: 12V DC/2A)
Content of delivery: 2 RPL 306 LED panels, 2 light tripods, 2 power adapters, 2 transparent
filters, 2 amber filters, carrying bag
reflecta RPL 306 StudioKit
Screw
Setting up/Operation
1. Set up the light tripod and tightly screw the RPL 306 LED panel with the ¼" thread
onto the screw of the tripod.
2. Plug the small plug of the delivered power adapter into the corresponding jack on the
light and the other plug into the power outlet.
3. Switch on the RPL 306 (set switch to I). The brightness can be adjusted with the
dimmer knob.
reflecta gmbh
λ
Junghansring 60
Phone: +49 (0)7457 9465-60
Internet: http://www.reflecta.de
LED RPL 306 StudioKit
λ
72108 Rottenburg-Ergenzingen/Germany
λ
Fax: +49 (0)7457 9465-72
λ
E-mail: mail@reflecta.de
Switch
Dimmer
DC jack for power adapter
for direct lighting of LED