Cleaning And Maintenance - SEMMA KW-2438SEM Mode D'emploi

Instruction manual
• Place the ingredients to be weighed on the weighing surface, the
display shows the weight and the ∆ symbol appears in the display
to indicate that the weight indicated is the correct weight value. If
the ingredients of the weighing surface are removed, there will
appear the 0 and the →0← ∆ symbols in the display, the device is
ready for a new weighting.
Display codes
• EEEE = The weight lies above the allowed maximum weight.
• LO = Time to replace te battery, please use two AAA batteries
Weigh with the tare function (the adding
function)
• With the adding function you can reset the display to 0 after
placing a product. This allows you to weigh in a bowl.
Do as follows:
• Place an empty bowl on the scale and press the scale on with the
on/off and tare switch and wait till 0 and →0← ∆ appears on the
display.
• Place the first ingredient you wish to weigh in the bowl.
• Read the weight shown on the display. After weighing, press the
on/off and tare switch to reset the scale to zero and you can add
the next ingredient.
• By repeating the step you can weigh multiple ingredients (e.g.
baking ingredients).
6

CLEANING AND MAINTENANCE

• Never immerse the electrical device in water or any other liquid.
The device is not dishwasher proof.
• Clean the appliance with a damp cloth. Never use harsh and
abrasive cleaners, scouring pad or steel wool, which damages the
device.
ENVIRONMENT
This appliance should not be put into the domestic garbage at
the end of its durability, but must be offered at a central point for the
recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your
attention to this important issue. The materials used in this appliance
can be recycled. By recycling of used domestic appliances you
contribute an important push to the protection of our environment. Ask
your local authorities for information regarding the point of
recollection.
Instruction manual
7