OK. ORC 300 Mode D'emploi page 27

POwER SUPPLY
1
Plug the AC power cord
into the AC inlet on the
back of the unit.
1
Remove battery
compartment door.
nOTE
• The batteries are not included; please refer to the safety instructions
provided by the battery manufacturer.
• Always turn function selector to OFF position before plugging/unplugging
the appliance or inserting/removing batteries.
• When using batteries, unplug the appliance from the mains.
• When not using appliance for a long time, remove batteries in order to avoid
leakage.
27
2
Plug the unit in.
2
Insert 8x C batteries
(not included) into
battery compartment.
Observe + and – mark-
ings.
En
or
3
Close battery
compartment door.