LENCO BMC-085 Mode D'emploi page 4

9. Do not use this device when condensation may occur. When the unit
is used in a warm wet room with damp, water droplets or
condensation may occur inside the unit and the unit may not function
properly; let the unit stand in power OFF for 1 or 2 hours before
turning on the power: the unit should be dry before getting any
power.
10. Although this device is manufactured with the utmost care and
checked several times before leaving the factory, it is still possible
that problems may occur, as with all electrical appliances. If you
notice smoke, an excessive build-up of heat or any other unexpected
phenomena, you should disconnect the plug from the main power
socket immediately.
11. This device must operate on a power source as specified on the
specification label. If you are not sure of the type of power supply
used in your home, consult your dealer or local power company.
12. Keep away from animals. Some animals enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol
based fluids. To remove severe stains, you may use a damp cloth with
dilute detergent.
14. The supplier is not responsible for damage or lost data caused by
malfunction, misuse, modification of the device or battery
replacement.
15. Do not interrupt the connection when the device is formatting or
transferring files. Otherwise, data may be corrupted or lost.
16. If the unit has USB playback function, the USB memory stick should
be plugged into the unit directly. Don't use an USB extension cable
because it can cause interference resulting in failing of data.
17. The rating label has been marked on the bottom or back panel of the
device.
18. This device is not intended for use by people (including children) with
physical, sensory or mental disabilities, or a lack of experience and
4