Télécharger Imprimer la page

Diana eleven Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

TRUGLO fiber optic sight
Colour contrast for a better sight acquisition, also accura-
te with low light.
Setting the sight
The settings for elevation is marked by the numbers 0 – 9
on the elevation adjustment screw.
» If rifle shoots high: turn screw clockwise.
» If rifle shoots low: turn screw counterclockwise.
Note: The numbers are just for memory, they do not apply
for distances.
Windage settings are marked on the sliding scale on
the rearsight rail and are controlled by turning the large
knurled screw on the side.
» If the rifle shoots to the right: turn screw clockwise.
» If the rifle shoots to the left: turn screw counterclockwise.
Care and Cleaning
At intervals the barrel should be cleaned by means of a
felt wad or cleaning rod with wool mop. Wire brushes
should not be used. Insert rod from breech end, do not
remove barrel seal.
The blueing prevents the outer parts from easy rusting.
Maintain protection by occasionally wiping these parts
with slightly oiled cloth.
It is detrimental to fire the weapon without a pellet in the
barrel, as the free impact strains the mechanism.
Do not leave the rifle in cocked position for long periods
whether loaded or not – as this weakens the mainspring.
For rifled barrels lead pellets are recommended only.
Do not use steel bolts, steel darts, BB's or similar.
P E R F O R MA N C E A I R G U N S S I N C E 18 9 0

Publicité

loading

Ce manuel est également adapté pour:

Twenty-oneTwo-fortyTwo-fiftyTwo-sixty