Playing A Compact Disc (Cd); Repeat Function - THOMSON MIC250IBT Mode D'emploi

Bluetooth Mode
You must follow several steps to connect your mobile phone:
1. Activate Bluetooth from your mobile phone (please refer to your phone's user manual)
2. Press the POWER button to turn on the unit, then rotate the SOURCE button repeatedly until the
"Bluetooth" indicator appears on the LCD display. It will be ready to pair automatically.
3. Use your mobile phone to search for the Bluetooth device named MIC250IBT"/"MIC256IBT.
4. Your mobile phone will find "MIC250IBT"/"MIC256IBT" and will present the option to connect or
not. Please connect to it using the password "0000" (if any). When you are successfully connected,
the Bluetooth indicator "Bluetooth connected" appears on the LCD display.
Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together. When the unit and phone
have been paired once, they will automatically connect when the unit is on and Bluetooth is activated
on the phone. The next time you power on, the unit will automatically connect to the most recently
connected mobile phone.
Press and hold to disconnect the Bluetooth.
Play from a Bluetooth Device
After successful Bluetooth connection, press the
the tracks backwards or forwards. To pause or resume play, press the
the button to disconnect Bluetooth.

Playing a compact disc (CD)

NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner
disc if it becomes dirty.
1. Press the POWER button to turn on the unit.
2. Rotate the SOURCE button repeatedly to select the CD function.
3. Press and hold the
side facing up).
4. Press and hold the
seconds, then play the 1st track automatically.
5. To temporarily stop playback, press the
6. Press the button to STOP play.
PREVIOUS/NEXT TRACK
1. The and
high speed.
2. Press the button once to hear the beginning of the current track. Press it two or more times to
hear previous tracks on the disc.
3. Press the button to hear the next track on the disc.
4. Press and hold the
previous track(s); When the desired track section is found, release the button and normal play will
resume.
5. Press and hold the
track(s). When the desired track section is found, release the selected button and normal playback
will resume.

REPEAT FUNCTION

The CD REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
1. Press the REPEAT button once during playback; the "REPEAT ONE" sign will appear on the LCD
display for about 2 seconds. The same track will be repeated over and over.
2. Press the REPEAT button a second time to repeat all tracks. The "REPEAT ALL" sign will appear
on the LCD display for about 2 seconds.
3. To cancel repeat play, press the REPEAT button repeatedly until "REPEAT OFF" appears on the
LCD display for about 2 seconds.
button to open the CD door and insert a CD into the tray (with printed label
button again to close the CD DOOR and the disc will rotate for a few
buttons are used to jump to a different track number or to scan disc tracks at
button. The current track will be scanned and move backwards to the
button; the current track will be scanned and move forward to the next
button to play. Press the
button, and to resume playback, press it again.
- EN 8 -
or button to skip
button again. Press and hold