Technical Data - oventrop Oilstop V Notice D'utilisation

Oilstop V anti-siphon valve
Technical description
3.4

Technical data

Technical data
Connections
Fluid
Oil flow rate
Protection height
Setting range
Installation position
Ambient temperature
Medium temperature
Operating pressure
Test pressure
Weight
TÜV tested
* according to DIN 4755, the temperature of the heating oil should be
between 0 °C and +40 °C.
36
G 3 ⁄ internal thread, with cone for
8
Oventrop brass compression fittings 6, 8,
10 and 12 mm
•
EL heating oil according to DIN 51603-
1 (max. density 860 kg/m³)
•
EL A Bio 5 to Bio 15 heating oil
according to DIN SPEC 51602-6 with
addition of FAME according to DIN EN
14214 without additional alternative
components
max. 200 l/h with ∆p 40 mbar
1.0 to 4.0 m
•
"entlüften" (bleed),
•
Protection 1.0 to 4.0 m,
•
"absperren" (shut off)
Any, but easily accessible
-25 °C up to a maximum of 60 °C *
0 °C up to 40 °C *
Suction pressure up to –0.9 bar
max. 6 bar
380 g
TÜV-SÜD, no.: V 1662-00/20
210420384-V02.08.2021