Unit Description; Operation; Important; Adjusting The Temperature - Sanitas SHC 40 Mode D'emploi

5. unit description

1

6. Operation

Important

• Straighten the mains cable [8] if it becomes
twisted.
• Do not pull, twist or kink the mains cable [8];
do not pull or lay it across/on sharp, pointy
objects or hot surfaces.
• Do not jam the mains cable [8] e.g. in a drawer
or door.
Warning
• Stand on a dry, electrically non-conductive
surface.
• Ensure that your hands are dry!
• Your hair must be dry!
• Depending on the temperature setting and
duration of use, the unit can become very hot.
If the unit is hot, touch it only by its handle –
burn and fire hazard!!
• Do not touch the heating plates [1].
2
3
4
5
1 Ceramic-coated heating plates
2 Operating display
3 The continuously adjustable
temperature regulation from
150 - 230°C
4 On/off switch
5 Lock
6
6 360° rotatable joint
7
7 Bend protection
8 Mains cable
8
• Switch the unit off immediately if it is defective
or malfunctioning.
• Unlock the straightener's lock [5].
• Set the On/Off switch to On [4].
- After about 30 seconds, the straightener is
ready for use.
- The operating display lights up when the
device is switched on.

adjusting the temperature

• The continuously adjustable temperature
regulation can be used to increase or reduce
the temperature. To increase the temperature,
turn clockwise. To reduce the temperature,
turn anti-clockwise.
11