Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation and use of the software:
Installation of application:
1.
Double-click the setup file "SCControl.msi" to start the installation of the software
(This file can also be used to de-install the software)
2.
Follow the steps of the installation assistant
3.
After completing the installation process, the file "SCControl.exe" is available on the desktop.
Installation of the device driver:
1.
Now connect the solar controller to your PC using the USB cable
2.
Go to "Control Panel" to start the "device manager"
3.
The solar controller is displayed as "SC/SCD Series Solar Charger"
4.
Now use the right mouse button to click on the displayed device
5.
Select "Browse my computer for driver software"
6.
Select the folder which contains the driver file (SC_series_usb.inf) and confirm by clicking "Next"
7.
Skip appearing safety instructions (
8.
The driver is installed
Note:
Using Windows 8 can cause problems with the driver signing. In this case, forcing the signing of the driver must be deactivated. We
suggest you learn more about this by referring to Windows 8 Help.
Connecting the device with the PC
1.
Now connect the solar controller to your PC using the USB cable
2.
Start the application "SCcontrol.exe"
3.
Select the tab "Connect to device" in the software window and confirm the "Connect" button.
4.
The PC automatically recognizes the connected solar controller (the window can then be closed)
5.
To make the desired device settings, select the tab "Parameters"
Install this driver software anyway)
The device can now be used
"Update driver software"
14
Publicité
Table des Matières
