Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
"
Charge controller
Intermediate switching device for controlling the charging current from a
maximum of 2 solar panels to the battery. Charges the battery with the
maximum current that the solar panels can supply according to the current
solar radiation level up to the gassing voltage and then switches to holding
charge. Overcharging of the battery is prevented. If the battery voltage falls
due to current being drawn, the battery is recharged immediately with the
current available from the solar panels. At night, a return flow of current back
to the solar panels is prevented.
Technical data
Front plate:
aluminium, anodised, matt black,
Dimensions/weight:
H 116mm x W 108mm x D 40mm, 115g
Operating voltage:
10 – 16V
Switched current:
max. 5A permanent current per solar panel
Current input:
1.8mA from the battery for the control electronics
Power loss:
0.5W per 1A charge current
Charge voltage:
main charge 14.4V/ holding charge 14.2V
Scope of supply:
SC 2002 with illuminated 10A ammeter and
control electronics, accessories kit, instruction
manual
Warranty
The warranty is in force for a period of two years from date of purchase.
Defects arising from material or manufacturing faults will be rectified free of
charge, provided that:
The device is sent to the manufacturer postage paid.
Proof of purchase is enclosed.
The device has been handled and used according to its specified purpose.
No foreign spare parts were installed and the device has not been
interfered with.
Consequential costs and normal wear and tear are excluded.
Important
Claims made under warranty should be accompanied by a detailed description
of the fault. This facilitates and expedites the processing. Please bear in mind
that we cannot accept items sent without the correct postage having been paid.
Lerchenfeldstr. 9 87600 Kaufbeuren Tél.: +49 (0)8341 9764-0 Fax: +49 (0)8341 67806
!!
5
Publicité
Table des Matières
