Getting Started - Easypix MovieCam SD III Mode D'emploi

Getting Started

Turning on your camera
Press and hold down the power button for 2 ~ 3 seconds
to turn on the camera.
The LED will light up.
If the camera is not turned on after pressing the power
button, please check:
1. There are four AA batteries installed in the camera.
2. The batteries have enough power left.
You can turn on the camera without opening the LCD panel.
Please open the lens cover if you are going to use the digital
video or camera function.
Turning off your camera
Press and hold down the power button for 2 ~ 3 seconds
to turn off the camera.
The LED will go out.
~ 8 ~