Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MINI TOWER FAN XT110
Please read the operating instructions carefully and keep them for future
reference.
I. PARTS
1
Air outlet
2
ON button
3
Timer button
4
Oscillation button
5
OFF button
6
Air intake
7
Front /casing
8
Base
9
Power lead
10 Back casing
11 Oscillation pilot light
12 Timer pilot light
13 Speed pilot light
II. SAFETY PRECAUTIONS
1.
Never use the appliance out of doors.
2.
Always leave a space of at least 10 cm between appliance and walls. This ensures
even air distribution.
3.
Protect the appliance from humidity and splashes.
4.
Please keep children away from the fan (risk of injury)
5.
Never tug the power lead out of the socket.
6.
Disconnect from the mains when the appliance is not in use.
7.
Never operate the appliance near fire hazard or explosive fabrics and materials.
8.
Repairs may only be carried out by the after sales service.
9.
Damaged power leads may only be replaced by a qualified electrician.
III. STARTING UP
1.
Place the Mini Tower Fan on a dry, flat surface
2.
Check that the rated voltage corresponds to the socket voltage.
3.
Plug the mains plug into the socket and press the ON button. The ventilator will
start running. The speed of the fan can be adjusted by pressing the ON button
again.
4.
When the oscillation button is pressed the tower fan starts to oscillate through
90°. This function can be switched off by pressing the button again.
5.
When the timer button is pressed the fan runs for 4 hours before switching off
automatically.
6.
Press the OFF button to switch the fan off.
13
12
11
10
2
INSTRUCTION MANUAL
1
2
3
4
6
5
7
9
8
Publicité
Table des Matières
