INSTAAL INSMAN Mode D'emploi page 6

I. SETUP
Thank you for choosing our INSTAAL screen. All our screens have passed a strict quality inspection
before delivery. Please read this manual carefully to ensure proper use.
1. Unpack the screen carefully, and make sure it is in good condition. Check that all the accessories
are packed inside the carton.
2. Choose a suitable place for installation. Moving parts (weight bar) must be installed higher than
2 cm above the floor.
3. Refer to the below figure to fix the screen on the wall or on the ceiling (screws and brackets are
not provided). The distance between the screws must be equal to the one between the 2 rings
and they should be at the same level. The rings must be strong enough to load more than 25 kg.
WALL MOUNTING
RING
WEIGHT
BAR
UK
CASING
SCREEN
BLACK BORDER
PULLING RING
CEILING MOUNTING