Audio Tones - König Electronic GAMPS3-BLUETH1 Mode D'emploi

AUDIO TONES

The audio tones provide information about your headset status
Audio tone
Audio Indication
Audio indication
Ring tone
Single high tone
Audio Indication
Safety precautions:
Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to
incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby
recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should not be mixed
with general household waste. There is a separate collections system for these products.
Funktionen:
Headset aufladen:
1. Das USB-Ladegerät an die Anschlussbuchse an der Seite des Geräts anschließen. Der rote Indikator leuchtet
während der Aufladung der Batterie. Es kann bis zu 1 Minute dauern, bis der Indikator aufleuchtet. Wenn die Batterie
komplett geladen ist, schaltet sich der Indikator automatisch aus.
2. Das USB-Ladegerät vom Headset trennen.
1. Ohrbügel
2. Lautsprecher
3. Lautstärke erhöhen (+)
4. Lautstärke reduzieren (-)
Headset status
Redial last call
Low battery
Incoming call
Pairing successfully recognized
Headset turn on, turn off
DEUTSCH
5. Multifunktionstaste
6. Ladekabelanschluss
7. Indikator
8. Mikrofon
4