König Electronic GAMPS3-BLUETH1 Mode D'emploi page 3

Go to "Settings for audio device" in the settings menu:
1. Watch the indicator bar and speak into the headset, when you see movement in the bar the headset is installed
properly.
2. You can adjust the volume to your own desire.
NOTE: After pairing the PS3
time.
Change to use the other ear:
You can wear the headset on the left or right ear. To change the headset to another ear:
1. Lift the top of the ear hook off the upper hinge pin.
2. Pull the hinge pin away and remove it from headset.
3. Change the direction.
4. Fix the ear hook on the headset again.
Pull Earhook Up
Hinge Pin
Call functions for cell phone use:
End a call
Receive a call
Reject a call
Transfer a call from the phone to the headset
NOTE: The headset supports both hands free and headset profiles. Accessing call functions depends upon which profile
your phone supports. See your phone's user guide for more information. The indicator light provides information about
your headset status.
With the charger plugged in
Headset status
Red indicator on
Red indicator off
With no charger plugged in
Headset status
Off
On (blue & red Indicator flash in sequence)
Blue & red indicator stop flashing
Blue indicator flashes (0.1sec on, 2.9sec off)
Blue indicator flashes (0.1sec on, 2 .9sec off)
Red indicator flashes
®
and the headset once, you do not have to repeat it again when you want to use it the next
Press the multifunctional button
Press the multifunctional button
Press and hold the multifunctional button for 2 seconds
Press and hold the Volume+ button
Headset indicator
Charging in progress
Charging complete
Headset indicator
Power off
Paring mode
Pairing successful
Connected (on a call)
Standby (free)
Low battery
3