AFG 7.3AIC Guide D'utilisation page 11

CONSOLE OPERATION
BUTTONS
MODE/RESET To confirm all settings. Press this button and hold for 2 seconds to reset all function figures.
SET To set up the value of TIME, DISTANCE, CALORIES, PULSE. You can hold the button to increase the
value fast. (The computer has to be in stop condition.)
FUNCTIONS
SCAN Displays all function TIME→DISTANCE→CALORIES→ PULSE→ RPM/SPEED in sequence.
RPM Displays the pedaling Rotation Per Minute. The RPM and SPEED will switch to another display in every
6 seconds after exercise starts.
SPEED Displays the user's exercise speed.
TIME 1. You can press "SET" button to set target time between 0:00 to 99:00 for count down function.
2. It can be set up by the user or accumulated automatically for count up function.
DISTANCE 1. Your can press "SET" button to set target distance between 0:00 to 99:50 for count down function.
2. It can be set up by the user or accumulated automatically for count up function.
CALORIES 1. You can press "SET" button to set target calories between 0 to 9990 for count down function.
2. It can be set up by the user or accumulated automatically for count up function.
PULSE Displays the user's pulse. User may set the target pulse. When pulse value reaches to the target, the
computer will alarm with "Beep" sound.
WIRELESS HEART RATE
This bike includes a Polar wireless heart rate strap and has a built-in wireless heart rate receiver. When used in conjunction
®
with a wireless chest transmitter, your heart rate can be transmitted wirelessly to the console.
Prior to wearing the wireless chest transmitter on your chest, moisten the two rubber electrodes with water. Center the chest
strap just below the breast or pectoral muscles, directly over your sternum, with the logo facing out. NOTE: The chest strap
must be tight and properly placed to receive an accurate and consistent readout. If the chest strap is too loose, or positioned
improperly, you may receive an erratic or inconsistent heart rate readout.
11