OMI CHW 09 Manuel D'utilisation Et D'entretien page 34

710.1760.00.02-03A
HOW TO RESET AN ALARM EVENT (CONTROLLER TYPE "C")
Controller Type "C"
(CHW 682 to CHW 3652;
CHG 180 to CHG 365)
1) Enter the menu by pressing the
2) Use the or
3) Press the key and release it; the alarm code will now appear on the lower display.
4) Upper display: rSt will appear in the display if the alarm can be reset, NO if this is not possible. Use
the or key to scroll through the alarm list.
5) Press the key when rSt lights up in order to reset the alarm; after a short time the system will
move on to the next alarm.
6) To exit the function menu, press the
"menu" symbol will disappear.
key.
key to show "ALrM" on the display.
key and then release it or wait for the timeout. The
34
26/11/2012