Camera Operation; Switching On The Camera; Adding Another Camera; Removing A Camera - Inanny NC112 Manuel D'utilisation

4.
To activate the "Do not disturb" function, first tap "Do not disturb" and then "ON" to the
right. Now set the required length of time (3 hours max.) by moving the point.
Note
When the "Do not disturb" function is activated, you will not receive push messages during
the period selected.

8. Camera operation

8.1 Switching on the camera

IMPORTANT
Only use the mains part plug included in delivery.
1. Connect the small end of the mains part plug to the camera.
2. Connect the other end of the mains part plug to the socket.
3. Slide the ON/OFF switch on the side to "ON". The function light starts to glow blue. (Push
the ON/OFF switch downwards to switch off the camera.)
4. Open the "iNanny Monitor" app on your smartphone/tablet or the web portal on your PC.
5. Log into your account.
6. When you have correctly set up your camera (see Chapter 7), the transmission image
appears on the display.

8.2 Adding another camera

It is possible to connect up to 4 cameras with one user account:
1. When you see the current transmission image, tap the "iNanny Monitor" logo on the top
left. You are taken to the camera menu.
2. Now tap "Add camera" on the bottom left.
3. Follow the instructions in the app. As soon as you have successfully logged in, the
transmission image of the attached camera appears automatically.

8.3 Removing a camera

To remove a camera from your user account again, proceed as follows:
1. Tap the settings symbol (
2. Tap on "Camera details".
3. Tap "Remove camera" and confirm.

8.4 Account settings / signing out

In the account settings you can, amongst other things, change your password, view
your app version or log out.
1. When you see the current transmission image, tap the "iNanny Monitor" logo on the top
left. You are taken to the camera menu.
2. Now tap "Account" on the top right.
3. In order to change your password, tap "Change password" and follow the instructions. If
you would like to log out of your account, tap "Log out" and confirm.
) in the camera menu of the camera you wish to remove.
7