Maco PROTECT OPEN-DOOR Notice D'utilisation page 8

Commissioning
Following commissioning of the system, a blue light illuminates.
Follow the instructions!
Enrolling new keys
1 Place your PRIMARY CARD directly in front of the reader until
the blue LED starts to flash. The enrollment mode is now active.
2 Place your key, key card or chip in front of the reader until
the green LED turns on. The start of the opening process will
indicate the system's operational readiness. The keys, key
cards or chips have now been stored on the MACO openDoor
Transponder-Plus.
1 2
- 8 -