Quick Guide - Navcom Touchpad Instructions D'utilisation

ADMINISTRATOR CODE
(first code entered)
PRESS 3 s
USER
BLUE IS FLASHING
CODE
SLOWLY.
PRESS
DELETE USER
BLUE IS
CODE
FLASHING.
CHANGING PRESS
ADMINISTRA- BLUE IS
TOR CODE FLASHING.
PRESS
DELETE ENTIRE
BLUE + RED ARE FLASHING
BASE
ALTERNATINGLY.
ENTER
UNLOCKING THE
YOUR CODE
DOOR
AND PRESS .
LIGHTING
PRESS
MODE TURN
20s.
OFF AFTER 15 s
22
EN EN
* This step is not available with the BBX control unit
CHOOSE THE RELAY*: RELAY 1: number 1
PRESS 3 s
BOTH RELAYS: numbers 1 nd 2
BLUE IS FLASHING
RAPIDLY.
BLUE IS FLASHING SLOWLY.
ENTER ADMIN. CODE.
PRESS .
GREEN + BEEP 1 s. BLUE
IS FLASHING RAPIDLY.
5 s. ENTER ADMIN. CODE. PRESS .
GREEN + BEEP 1 s. GREEN AND RED ARE
FLASHING ALTERNATINGLY.
ENTER ADMIN. CODE.
5 s
PRESS .
GREEN + BEEP 1 s.
GREEN AND RED ARE
FLASHING ALTERNATINGLY.
AND 10 s.
ENTER ADMIN. CODE
AND PRESS .
GREEN + BEEP 1 s
THE DOOR UNLOCKS.
BLUE IS FLASHING AFTER 3 s (ignore
and remain pressing the button),
GREEN IS FLASHING.
RELAY 2: number 2
GREEN + BEEP 1 s.
* This step is not available with the BBX control unit
CHOOSE THE RELAY*: RELAY 1: number 1
RELAY 2: number 2
BOTH RELAYS: numbers 1 nd 2
GREEN + BEEP 1 s.
BLUE IS FLASHING SLOWLY.
ENTER USER CODE YOU
WISH TO DELETE.
PRESS
ENTER OLD ADMIN. CODE,
PRESS 1 s.
GREEN + BEEP 1 s.
BLUE IS FLASHING.
BLUE + RED + BEEP 5 X 1 s.
ENTIRE CODE BASE IS
DELETED.
SELECT LIGHTING MODE
TURN OFF AFTER 15 s:
PRESS 1 s.
SELECT CONSTANT
LIGHTING:
PRESS 1 s.
GREEN + BEEP 1 s
ENTER ADMIN. CODE
4 - 16 NUMBERS. THE CODE IS
PRESS 1 s. SAVED.
ENTER USER CODE
GREEN + BEEP 1 s
4 - 16 NUMBERS.
PRESS 1 s.
GREEN + RED + BEEP 3 X 1 s.
USER CODE IS DELETED.
1 s.
ENTER NEW
ADMIN. CODE
4 - 16 NUMBERS.
PRESS 1 s.
GREEN + BEEP 3 X 1 s.
LIGHTING MODE TURNS OFF 15 s
AFTER THE END OF EACH FUNCTION.
GREEN + BEEP 1 s.
CONSTANT LIGHTING
IS TURNED ON.
THE CODE IS
SAVED.
GREEN + BEEP 1 s.
NEW ADMIN. CODE
IS SAVED.