ACME Zoopa Q 410 movie Manuel D'utilisation page 16

.
Inserting and Connecting the battery
As soon as the battery is fully charged, you can insert it in the case on the bottom side of the model.
Switch on the controller. The LED of the controller begins to flash. Move the gas stick (left) up and
down to its end position and repeat it again. The LED will then shine permanently. Repeat it once
again.
Now connect the battery to the model and check the polarity!
Place the zoopa Q410 Movie on a plain surface. The LED of the Quadrocopter flashes very fast at the
beginning and passes over to a slow blinking, which shows a successful binding between the controller
and the model.
Beginner and Professional Mode
You can switch between the Beginner and Professional mode. When choosing the Beginner mode, the
Quadrocopter will fly with reduced motor speed. It allows you to test all functions carefully. When
switching to Professional mode, the Quadrocopter will fly faster and more agile.
You will find the button on the drawing on the previous pages.
www.acme-online.de
ACME the game company