ECG RS 840 Mode D'emploi page 24

HAND MIXER
IMPORTANT SAFETY MEASURES
Before putting an electric product into operation you should adhere to
basic provisions, including the following:
1. Read all instructions.
2. Before use check that the voltage in your power socked corresponds
to the voltage on the label located on the underside of the product.
The outlet must be installed in accordance with applicable electrical
codes according to EN.
3. Do not use the product if the power cord is damaged, if it is
malfunctioning, if you have dropped it or in any other way damaged
it. Take the product to the nearest authorised service centre, where it
GB
will be inspected, and electrical or mechanical parts will be repaired
or modi ed.
4. If you are not using the product, before installation or disassembly
of parts and before cleaning, disconnect it from the power socket by
pulling out the power plug!
5. Do not leave the cord hanging over a table edge or shelf and don't
place it on a hot surface.
6. Do not place the cable or mixer itself in water, you can be exposed
to danger of injury by electric shock.
7. Avoid contact with moving parts. Do not touch the whisks during
operation with your hands, a wipe or other kitchen utensils, you will
reduce the risk of injury and/or damage to the mixer.
8. Remove all the accessories from the mixer before washing it (beaters,
blender). Wipe the drive unit with damp cloth only and then wipe
dry.
9. Turn o the product before changing accessories or coming near
parts that move during operation.
10. Do not use the product for purposes other than those here speci ed.
11. Do not use outdoors.
12. Store this user's guide.
13. This appliance can be used by children ages 8 and older and by the
physically and mentally impaired or by individuals with insu cient
experience and knowledge, if supervised or trained to use the
appliance in a safe manner and understand the risks involved with
24