GERATHERM tensio control Mode D'emploi page 29

HOW TO OPERATURE THE DEVICE
3. Recalling Stored Values
3.1 Press and release the MEMO-
RY key to recall the last read-
ing. (Example: no. 35 in the
memory). The display will show
the stored pressure and pulse
rate.
3.2 Press the MEMORY button to
go to previous stored values.
4. Erasing Stored Values
You may erase one or all records in the memory.
To delete one record:
Step 1: Press and release MEMORY button to dis-
play stored values. Press and release MEMORY
button again to choose the record that you wish to
delete.
Step 2: Press and hold the POWER button until
the display shows „dEL".
Step 3: Press and hold the POWER button. After three beeps are heard, the selected
record is deleted.
To delete all stored values:
Follow steps 1 and 2 above.
Step 3: Press the MEMORY button again and the display shows „dEL ALL".
Step 4: Press and hold the POWER button. After three beeps are heard, all records
are deleted.
GB
11 - GB