Publicité
Les langues disponibles
Les langues disponibles
Front panel
In center of the front panel the logo will be lit when power is on.
Replacing a blown main fuse
The main fuse is located in a small drawer inside the AC inlet of the unit.
If, for some reason, the fuse is blown, turn the unit off and remove the AC cord from the AC
inlet.
Open the drawer with a small screwdriver and remove the blown fuse.
The spare fuse is located inside a holder beside the main fuse.
1.
Remove the spare fuse gently by drawing it out of its holder.
2.
Insert the spare fuse as the active fuse.
3.
Push the drawer gently back to closed position.
4.
Re-insert the AC cord and turn the unit on.
Never replace the fuse with other values than indicated on the unit!
Input configurations
XLR input:
1 = ground
Output configurations
Speaker:
Red = positive
Please notice:
Both outputs are hot.
Do not under any circumstances short these to ground or chassis.
Diagram 2
Diagram 3
Diagram 4
2 = positive
Diagram 4
Black or White = negative
3
3 = negative
USA
GB
Publicité
