Cleaning, Care & Maintenance; Technical Specifications - Buffalo GF239 Mode D'emploi

Cleaning, Care & Maintenance
Isolate the power supply and allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the appliance.
• DO NOT use abrasive cleaners or pads.
• Dry thoroughly after cleaning.
• There are 2 removable air filters on the bottom of the appliance. Pull them out and clean with a
vacuum cleaner. Put back afterwards.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
Troubleshooting
If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Error Message
Unit Beeps No pan or pan not suitable for
induction cooking
E01 Unit has overheated
E02 Pan being heated is empty,
temperature of pan is too high
E03 Power input has risen/fallen
below units operating limits

Technical Specifications

Model Voltage
GF239 230V 50Hz
GF239_ML_A5_v2_170712.indb 5
Probable Cause
Use pan suitable for induction cooking such as
Vogue Stainless Steel Range
Ensure ventilation filter (located underneath
unit) is clean and unblocked. Allow unit to cool.
If error code still appears after unit has cooled
contact a Buffalo agent or qualified engineer.
Remove pan from unit. Allow unit to cool.
Ensure pan contains product to be heated. If
error code still appears after unit has cooled
contact a Buffalo agent or qualified engineer
Switch off unit. Allow unit to cool. If error code
still appears after unit has cooled contact a
Buffalo agent or qualified engineer
Power Power range
Current
(Max.) (Per ring)
7000W 29.2A 500 - 3500W
UK
Solution
Dimensions
Weight
h x w x d mm
130 x 390 x 720 15kg
2017/7/12 17:53
5