Renkforce 1408618 Notice D'emploi page 65

• Use "+" or "-" to set the respective hours and
minutes.
• Select a weekday.
• Choose if you want to repeat the timer every
week. If so, tap "Repeat weekly". The check
mark turns blue.
• To save, tap the "Save" in the setting window of the timer.
• The programmed timer will be displayed in the overview
now.
• If you tap the click symbol on the right, you can switch
the respective timer off and on. If the symbol is blue, the
respective timer is on.
• You can add further timers or tap "Save" to save them
and return to the lamp setting.
• Now tap "Device status" and
set the brightness and colour
temperature of the lamp. You can
additionally automate playback
here. This works in the same way
as manual operation. Tap "Save"
in the small window after making
the settings.
65