Inakustik PREMIUM DLNA Mode D'emploi page 11

2. Switch the adapter from AP to client mode:
2.1 Confirm your smart device has been WiFi connected to the AP of the adapter. In the WLAN
setting page of your smart device. It shall indicate like: in-akustik_DLNA_V01 connected.
2.2 Turn on the Webpage browser of your smart device.
2.3 Input the IP address (Shown on the TV screen as IP: 192.168.10.100)
in the address bar to login the setting page of the adapter.
2.4 Your smart device should show a setting page like this:
2.5 Choose a WLAN router/AP available, select the security mode and input the password of the
WLAN router/AP, press the connect button. The adapter should be connected to preferred
WLAN router/AP.
2.6 When an IP address will be assigned to the device and it should be shown on the TV screen.
Such as: 192.168.1.103. It means the adapter device has been changed to client mode and
connected to the WLAN router/AP successfully.
2.7 The signal indicator shows the received signal strength from the router/AP. The more green
bars indicate the better signal, it normally means the data rate between the adapter and the
connected router/AP will be higher.
Tips: Since the adapter device has been changed to Client mode, and it connects to the router/AP. In
your WLAN setting page of your browser, you can't find the SSID of the adapter device any more,
which means your smart device is disconnected with the adapter device.
To access the adapter device, you should connect your smart device with the router/AP that the
adapter connected. Through the router/AP, you can access the adapter.
2.8 Quit from the webpage browser.
2.9 Connect smart device to the router/AP that the adapter connected. (Of course, you have to
select its encryption mode and input correct security password).
2.10 Now you are available to use the adapter again.
HINTS:
When you play/view media files on your smart device, the media data is transferred(shared
by the DLNA technology) from the smart device to the connected router/AP and transferred to the
adapter, then to the TV set connected, the media finally shows on the TV screen.
USER MANUAL
11